Hyundai Elantra: Repair procedures
Turn the steering wheel so that the front wheels can face straight ahead.
Measure the distance the steering wheel can be turned without moving the front wheels.
If the play exceeds standard value, inspect the steering column, shaft, and linkages.
Position the vehicle on a level surface and place the steering wheel in the straight ahead position.
Start the engine and turn the steering wheel from lock to lock several times to warm up the power steering fluid.
Attach a spring scale to the steering wheel. With the engine speed 900 ~ 1100rpm, pull the scale and read it as soon as the tires begin to turn.
If the measured value exceeds standard value, inspect the power steering gear box and pump.
Rear Trailing Arm. Repair procedures
Removal 1. Remove the rear wheel & tire. Be careful not to damage to the ...
[SULEV] 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the connector (A), and th ...
Idle Speed Control Actuator (ISCA). Schematic Diagrams
Circuit Diagram ...